The ploughshare's coulter is divided into two types, left and right, and the installation method is as follows.
1. Staggered installation method: The left and right machetes are staggered symmetrically on the cutter shaft. The left and right outer ends of the cutter shaft should be bent inwards. This method uses rotary flats and is suitable for flat construction. It is a common installation method. .
2. Inward installation: The left and right machete are bent toward the center of the cutter shaft. In this method, after cultivating, there is a ridge in the middle of the cultivator, and it is suitable for tillage. It also allows the unit to cross trenches and fill the trenches.
3. Outward mounting method: the left and right scimitars are bent at both ends of the cutter shaft, and a knife at the outermost end of the cutter shaft is bent inwards. After the rotary tillage, there is a shallow ditch in the middle of the tillage, which is suitable for the combined operation of demolition or rotary tilling. Note: The installation of the blades should be performed in sequence, paying attention to the rotation direction of the cutter shaft. Both ends of the centerline of the cutter shaft must be symmetrically arranged. Do not put the blade back into the soil to avoid damage to the parts.
Absorbent of Carbon Dioxide-Soda lime
Co2 Absorbent,Co2 Absorber,Litholyme Co2 Absorbent,Carbolime Co2 Absorbent
Zhejiang Hisern Medical Technology Co., Ltd , https://www.hisernmedical.com