Xin Weng brand photochemical reactor use instructions

Xinwen brand photochemical reaction series was successfully developed by Shanghai Jiaotong University and many professors of East China University of Science and Technology. It is mainly used to study gas or liquid medium, fixed or mobile system, ultraviolet or simulated visible light, and reaction vessel. Whether the photochemical reaction under the conditions of TiO2 photocatalyst or the like is supported. It has the functions of providing analytical reaction products and free radicals, measuring reaction kinetic constants, measuring quantum yield, etc., and is widely used in chemical synthesis, environmental protection, and life sciences.

Main features:
●Microcomputer controller, power continuously adjustable (domestic leading).
● The controller is equipped with an ammeter and a voltmeter to facilitate observation of current and voltage changes.
● There is a microcomputer timer, which can be stepped.
●The internal illumination source is fully exposed to light.
●Equipped with eight magnetic stirring device to make the sample fully mixed and receive light.
● Double-layer quartz cold trap, which can be circulated into the cooling water to avoid excessive temperature damage.
● There are 2 dedicated sockets on the left side of the cabinet for the light source inside the box and the stirring reactor plug.
●Equipped with a movable cart for easy movement or fixing.
● XW-GHX-V is suitable for the processing of small batch samples.

Instructions:

1. Preparation: Before using the instrument should first of eight reactors (or magnetic stirrer) into the mainframe, cold trap fixed quartz, quartz reaction tube (or reaction vessel) was placed within a magnetic. Then check if the mercury lamp (xenon lamp), reactor and cooling water circulation device to be used are connected.

2, a mercury lamp: the desired mercury into the power socket inside the chassis, pressing the button corresponding to a mercury lamp power supply, after pressing the button lights reactor, cooling water circulation means and the fan is turned on, the machine starts working . To end the experiment or to stop the experiment midway, press the power button to turn off the light source.

3, a xenon lamp: the desired power xenon lamp socket is inserted into the interior of the chassis, pressing the button corresponding to a mercury lamp power supply, after pressing the button lights reactor, cooling water circulation means and the fan is turned on, the machine starts working. To end the experiment or to stop the experiment midway, press the power button to turn off the light source.

Note: When using a mercury or xenon lamp for experimentation, the lamp source must be placed in a quartz trap (it is recommended to also have a cooling water circulation device).