Operating points of HNY-850 shaker when in use

Pay more attention to the following points when using the HNY-850 shaker:

1. The instrument should be placed on a hard and firm surface and ensure its horizontal state. It must be kept at a distance of about 50cm from the wall and the object.

2. Do not place the instrument in a heat source such as a stove or in direct sunlight.

3. This equipment should be kept away from sources or high frequency electromagnetic interference sources.

4. Please confirm the local voltage before use. If the power supply voltage does not meet the requirements, it will cause damage to the instrument or work abnormally.

5. The operator and the rocker should be kept at a certain distance during the rocker operation to avoid bumps or affect normal operation.

6. The surface of the instrument should not be in contact with volatile chemicals such as gasoline and banana water.

7. The flask clamp fixing screws should be checked frequently to prevent noise or the clamp from falling off.

8, keep the inside and outside of the box clean, often clean up debris, smudges.

9. The oscillating shaker must be lubricated with an appropriate amount of oil to each rotating shaft before each use.