1. Inflammable and explosive materials are not allowed to be stored in the operation room. Operators must be trained before they are employed, knowing the operating procedures and methods of use.
2. Carefully check whether the pressure gauge thermometer venting valve and venting pipe are unobstructed, whether the power connection pipe is correct, check the water volume in the water tank, and clear the water quality to ensure that it is used under normal conditions.
3 , placed items, placed reasonably, there must be sufficient space around the items, which is conducive to air circulation. Prevent too many items from being placed.
4. Place a sterilization indicator card near the door.
5. Close the winch door.
6. Turn on the power switch and start heating.
7. Eliminate the cold air in the interlayer, 2 to 3 minutes, be sure to drain.
8. Control the interlayer exhaust valve to be slightly open and continue to drain the condensate.
9. When the pressure gauge to be laminated rises to 0.1mpa , open the intake valve of the inner pot and discharge the cold air from the inner pot for 3-4 minutes.
10. Control the inner pot exhaust valve to the micro-open state and continue to drain the condensate.
11. At this time, the pressure of the two gauges rises at the same time. When the pressure required for sterilization reaches the temperature of 126.2 degrees, the time can be counted. After 30 minutes, the power is turned off and the heat supply is stopped.
12. Discharge when the pressure gauge drops to 0.15mpa .
13. The pressure of the two gauges drops to “ 0 â€, close the inner valve of the inner pot, and the side body flashes open, slowly opening the winch door.
14. Remove the items after drying, indicate the date of sterilization, store in a sterile kitchen, make a record, and re-sterilize for more than one week.
15. Wipe the inside and outside of the sterilizer and keep it clean.
16 , make a handover record.
Shangyu Xingxing Instrument Equipment Co., Ltd. is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province. It is an enterprise integrating production, product research and development, processing and trade. The company's main products: drying box series, incubator series, laboratory muffle furnace series, distilled water series, as well as clean workbench, air shower, fume hood, biological safety cabinet and other complete purification equipment.
The company has a strong technical research and development team, a strong after-sales guarantee service system, is the linger of the Chinese laboratory complete sets of equipment manufacturers, welcome customers to buy.
5 Point Safety Belt,Safety Harness Belt,Three Point Safety Belt,Full Body Harness Safety Belt
Shandong Binzhou Yong'an Labor Protection Factory , https://www.zhuqiangsafetybelt.com