Electronic platform scales, floor scale manufacturers, stainless steel floor scales
Electronic platform scale standard configuration: 1 set of weighing platform made of 6mm thick high-quality steel plate (compressive performance is more than 150% of the common electronic small floor scale on the market, the weighing platform adopts the m-shaped beam, which effectively solves the measurement error caused by the bending of the weighing platform. Optional thickening steel plate to increase the load-bearing capacity of the weighing platform), 4 cantilever beam load cells (weighing accuracy: OIML) +1 only junction box +1 weighing display instrument.
The electronic scale body is made of carbon steel U-shaped steel welding, optional stainless steel; the weighing platform is made of integral carbon steel, optional tread plate or stainless steel; the surface is sprayed with acrylic baking / stainless steel weighing platform: polished drawing.
First, the connection between the load cell and the junction box
Pass the cable of the load cell through the weighing platform, enter the junction box through the sealed joint, follow the different color code of the four-core or six-core cable, or receive the positive and negative excitation power, positive and negative feedback, positive and negative signals after measurement. On the corresponding pad or terminal block in the junction box.
Second, the junction box and the weighing display instrument connection
One end of the special shielded cable wire enters the junction box through the sealing joint, each core wire is connected to the corresponding pad or binding post in the junction box, and the other end is welded to the special plug corresponding to the weighing display instrument through the metal pipe. In order to insert the socket of the weighing display meter.
There are three points to note:
1. After the input and output wires in the junction box are connected, tighten, tighten and seal the joint, put the desiccant, and do the moisture-proof work, then fix the junction box cover;
2, for different load cells, according to different color standards to distinguish input, feedback, output, must not make mistakes;
3. For different weighing display instruments, the weighing sensor sockets and plugs used are different in form, and the connection method is different, so don't make mistakes.
Third, the weighing display instrument has been configured with a dedicated cable, used for weighing display instrument and printer, large-screen display, computer and other equipment.
Note: Make sure that the grounding is effectively grounded to prevent damage to the electronic platform when lightning strikes.
A CT scan makes use of computer-processed combinations of many X-ray images taken from different angles to produce cross-sectional (tomographic) images (virtual "slices") of specific areas of a scanned object, allowing the user to see inside the object without cutting.
Digital Radiography made affordable, Created to meet the needs of community to hospitals and private radiology practices, it enables the price-sensitive customers to join the drive to go digital.The versatile floor mounted radiography system enables you to go from film to CR to DR.Flooe-mounted easy for installation and operation
The United-imaging is floor mounted system comprises a radiographic table with integral floor guide rail and a wallstabd. Requiring little room preparation, it is easy to install.
United-imaging according to the international advanced processing mode and standardlize design. the parts are made with precision CNC machine and moulding. Which adopt high degree of standardized, reasonable and compact structure. With reliable, durable and elegant appearance and advanced processing technology.
Computed Tomography,Medical Computed Tomography Scanning Machine,Medical Ct Scanner,Computed Tomography In Ct Scanner
Shanghai Rocatti Biotechnology Co.,Ltd , https://www.ljdmedicals.com